1Zpresso Q2 (Heptagonal burrs)
- Grind range
- up to 1400 µm
- Per click
- ≈25 µm
- Adjustment
- 120 clicks
- Brew methods
- 17
It reaches about 1400 µm at its coarsest, which covers all 17 brew methods we chart.
Where the settings above come from. It is the maker's own page, not ours.
swipe the chart to see the whole scale
About the 1Zpresso Q2 (Heptagonal burrs)
The 1Zpresso Q2 (Heptagonal burrs) is a manual hand grinder with 38 mm conical burrs and stepped adjustment. It reaches about 1400 µm at its coarsest, which covers all 17 brew methods we chart. Each click moves the grind by roughly 25 µm.
What we found on this machine
Checked against
1Zpresso's "Q Grind Setting Reference". Read September 03, 2026.
The axis is in numbers over four rotations of ten, and the chart's caption gives the conversion in its own words: "Each of the three clicks between each whole number allows for extremely fine adjustment of the grind." So each number is three clicks, and the dial the chart draws is 40 numbers — 120 clicks.
That figure has a second, independent source agreeing with it: a published grind chart from elsewhere gives all three Q2 variants a 120-click axis. Two sources arriving at the same number separately is what makes it worth relying on.
1Zpresso charts no espresso and no Turkish for this series at all. Neither is guessed at here — where the maker publishes nothing, the settings you see are interpolated and marked as ours.
Every band edge on this chart resolved to within three hundredths of a whole number — close enough that the conversion above is arithmetic rather than an estimate.
Methods the 1Zpresso Q2 (Heptagonal burrs) covers
6 of these 17 settings are 1Zpresso's own published figures. The rest are worked out from this grinder's range. Start there and adjust to taste.
- Moka Pot 36–60 clicks · roughly 300–400 µm Fine From the maker
- Pour Over (V60) 54–96 clicks · roughly 450–650 µm Medium-fine From the maker
- Chemex 81–89 clicks · roughly 700–900 µm Medium-coarse
- AeroPress 36–60 clicks · roughly 400–700 µm Medium-fine From the maker
- French Press 78–114 clicks · roughly 900–1200 µm Coarse From the maker
- Cold Brew 94–111 clicks · roughly 1000–1400 µm Extra coarse
- Drip / Batch 36–60 clicks · roughly 600–800 µm Medium From the maker
- Siphon 54–96 clicks · roughly 500–700 µm Medium From the maker
- Cold Drip 81–89 clicks · roughly 700–900 µm Medium-coarse
- Percolator 78–114 clicks · roughly 900–1200 µm Coarse
- Cuccumella 54–96 clicks · roughly 500–700 µm Medium
- Kaapi Filter 54–96 clicks · roughly 450–650 µm Medium-fine
- Jebena 54–96 clicks · roughly 500–700 µm Medium
- Chorreador 54–96 clicks · roughly 450–650 µm Medium-fine
- Cafe de Olla 85–94 clicks · roughly 800–1000 µm Medium-coarse
- Prestina 54–96 clicks · roughly 500–700 µm Medium
- Vietnamese Phin 85–94 clicks · roughly 800–1000 µm Medium-coarse
1Zpresso Q2 (Heptagonal burrs) — frequently asked questions
Is the 1Zpresso Q2 (Heptagonal burrs) a manual or electric grinder?
The 1Zpresso Q2 (Heptagonal burrs) is a manual hand grinder with 38 mm conical burrs.
How much does each click change the grind on the 1Zpresso Q2 (Heptagonal burrs)?
Each click on the 1Zpresso Q2 (Heptagonal burrs) changes the grind by about 25 microns, so you can dial in small steps.
What grind sizes can the 1Zpresso Q2 (Heptagonal burrs) produce?
At its coarsest the 1Zpresso Q2 (Heptagonal burrs) reaches about 1400 µm, covering 17 of the brew methods we chart. Its finest setting isn't published, so we don't state one.
Can I copy grind settings from another grinder to the 1Zpresso Q2 (Heptagonal burrs)?
Not directly — every grinder's scale is arbitrary, so a number that works on one model won't match the 1Zpresso Q2 (Heptagonal burrs). Match the micron range instead, using the chart above.