Suggest an improvement

Anything wrong, missing, or worth adding? We read every one.

What is it

Thanks — that's with us

We read every one. If you left an email we'll come back to you when it lands.

Kingrinder P0

Manual grinder conical burrs 38 mm Range 0–90
Grind range
up to 1383 µm
Per click
≈18 µm
Adjustment
90 clicks
Brew methods
18

At its coarsest it reaches about 1383 µm, so Cold Brew sits partly beyond its range.

Kingrinder official site ↗

swipe the chart to see the whole scale

About the Kingrinder P0

The Kingrinder P0 is a manual hand grinder with 38 mm conical burrs and stepped adjustment. At its coarsest it reaches about 1383 µm, so Cold Brew sits partly beyond its range. Each click moves the grind by roughly 18 µm.

What we found on this machine

Checked against

KINGrinder's P-series manual, "Recommended Grinder Settings". Read August 29, 2026.

KINGrinder prints one table for the P0, P1 and P2, and reading across all three columns is what put the P0's own numbers on this page rather than the P2's.

Its espresso cell reads "Not recommended". This page carries no espresso setting for the P0 as a result — the maker declining a method is a fact about the grinder, and filling the gap with a modelled number would be overruling it.

Methods the Kingrinder P0 covers

4 of these 18 settings are Kingrinder's own published figures. The rest are worked out from this grinder's range. Start there and adjust to taste.

Kingrinder P0 — frequently asked questions

Is the Kingrinder P0 a manual or electric grinder?

The Kingrinder P0 is a manual hand grinder with 38 mm conical burrs.

How much does each click change the grind on the Kingrinder P0?

Each click on the Kingrinder P0 changes the grind by about 18 microns, so you can dial in small steps.

What grind sizes can the Kingrinder P0 produce?

At its coarsest the Kingrinder P0 reaches about 1383 µm, covering 18 of the brew methods we chart. Its finest setting isn't published, so we don't state one.

Can I copy grind settings from another grinder to the Kingrinder P0?

Not directly — every grinder's scale is arbitrary, so a number that works on one model won't match the Kingrinder P0. Match the micron range instead, using the chart above.