Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Electric | Hand grinder |
| Burr | Conical | Conical | Conical |
| Burr size | 48 mm | 83 mm | 42 mm |
| Dial | 200 clicks | 100 clicks | 90 clicks |
| Adjustment | Stepped | Stepless | Stepped |
| Per click | 12.5 µm | 10 µm | 15 µm |
| Grind range | 0–1400 µm | 0–1000 µm | 0–1350 µm |
| Maker manual | Not on file | Not on file | Not on file |
| Maker-sourced settings | 8 | 0 | 0 |
| Brew methods | |||
| Espresso |
48-64
From the maker
|
20-30
Modelled
|
7-22
Modelled
|
| Moka Pot |
96-120
From the maker
|
30-40
Modelled
|
15-31
Modelled
|
| Pour Over (V60) |
128-176
From the maker
|
45-65
Modelled
|
40-61
Modelled
|
| Chemex |
160-174
Modelled
|
70-90
Modelled
|
47-60
Modelled
|
| AeroPress |
96-120
From the maker
|
40-70
Modelled
|
27-47
Modelled
|
| French Press |
168-200
From the maker
|
90-100
Modelled
|
70-85
Modelled
|
| Cold Brew |
181-200
Modelled
|
100
Modelled
|
67-90
Modelled
|
| Drip / Batch |
96-120
From the maker
|
60-80
Modelled
|
40-53
Modelled
|
| Turkish |
32-48
From the maker
|
Not recommended | Not recommended |
| Siphon |
128-176
From the maker
|
50-70
Modelled
|
33-47
Modelled
|
| Cold Drip |
160-174
Modelled
|
70-90
Modelled
|
47-60
Modelled
|
| Percolator |
168-200
Modelled
|
90-100
Modelled
|
70-85
Modelled
|
| Cuccumella |
128-176
Modelled
|
50-70
Modelled
|
33-47
Modelled
|
| Kaapi Filter |
128-176
Modelled
|
45-65
Modelled
|
30-43
Modelled
|
| Jebena |
128-176
Modelled
|
50-70
Modelled
|
33-47
Modelled
|
| Chorreador |
128-176
Modelled
|
45-65
Modelled
|
30-43
Modelled
|
| Dallah |
50-84
Modelled
|
20-40
Modelled
|
13-27
Modelled
|
| Cafe de Olla |
167-181
Modelled
|
80-100
Modelled
|
53-67
Modelled
|
| Prestina |
128-176
Modelled
|
50-70
Modelled
|
33-47
Modelled
|
| Vietnamese Phin |
167-181
Modelled
|
80-100
Modelled
|
53-67
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.