Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Hand grinder | Hand grinder |
| Burr | Conical | Conical | Conical |
| Burr size | 48 mm | 38 mm | 48 mm |
| Dial | 100 clicks | 140 clicks | 60 clicks |
| Adjustment | Stepped | Stepped | Stepped |
| Per click | 18.75 µm | 18 µm | 20 µm |
| Grind range | 0–1400 µm | 0–1400 µm | 0–1200 µm |
| Maker manual | Not on file | On file | Not on file |
| Maker-sourced settings | 8 | 4 | 0 |
| Brew methods | |||
| Espresso |
30-45
From the maker
|
Not recommended |
10-15
Modelled
|
| Moka Pot |
50-70
From the maker
|
60
From the maker
|
15-20
Modelled
|
| Pour Over (V60) |
80-87
From the maker
|
100
From the maker
|
23-33
Modelled
|
| Chemex |
87-91
Modelled
|
112-128
Modelled
|
35-45
Modelled
|
| AeroPress |
50-70
From the maker
|
60
From the maker
|
20-35
Modelled
|
| French Press |
90-100
From the maker
|
140
From the maker
|
45-60
Modelled
|
| Cold Brew |
94-100
Modelled
|
136-140
Modelled
|
50-60
Modelled
|
| Drip / Batch |
50-70
From the maker
|
104-120
Modelled
|
30-40
Modelled
|
| Turkish |
20-36
From the maker
|
Not recommended |
4-8
Modelled
|
| Siphon |
80-87
From the maker
|
80-112
Modelled
|
25-35
Modelled
|
| Cold Drip |
87-91
Modelled
|
112-128
Modelled
|
35-45
Modelled
|
| Percolator |
90-100
Modelled
|
140
Modelled
|
45-60
Modelled
|
| Cuccumella |
80-87
Modelled
|
80-112
Modelled
|
25-35
Modelled
|
| Kaapi Filter |
80-87
Modelled
|
100
Modelled
|
23-33
Modelled
|
| Jebena |
80-87
Modelled
|
80-112
Modelled
|
25-35
Modelled
|
| Chorreador |
80-87
Modelled
|
100
Modelled
|
23-33
Modelled
|
| Dallah |
34-49
Modelled
|
Not recommended |
10-20
Modelled
|
| Cafe de Olla |
89-94
Modelled
|
120-136
Modelled
|
40-50
Modelled
|
| Prestina |
80-87
Modelled
|
80-112
Modelled
|
25-35
Modelled
|
| Vietnamese Phin |
89-94
Modelled
|
120-136
Modelled
|
40-50
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.