Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Electric | Hand grinder |
| Burr | Conical | Flat | Conical |
| Burr size | 38 mm | 54 mm | 48 mm |
| Dial | 36 clicks | 60 clicks | 200 clicks |
| Adjustment | Stepped | Stepless | Stepped |
| Per click | 30 µm | 13.17 µm | 12.5 µm |
| Grind range | 0–1080 µm | 110–900 µm | 0–1400 µm |
| Maker manual | On file | Not on file | Not on file |
| Maker-sourced settings | 3 | 0 | 8 |
| Brew methods | |||
| Espresso |
7-8
From the maker
|
7-14
Modelled
|
48-64
From the maker
|
| Moka Pot |
9-11
Modelled
|
14-22
Modelled
|
96-120
From the maker
|
| Pour Over (V60) |
13-16
From the maker
|
26-41
Modelled
|
128-176
From the maker
|
| Chemex |
16-17
Modelled
|
45-60
Modelled
|
160-174
Modelled
|
| AeroPress |
11-16
Modelled
|
22-45
Modelled
|
96-120
From the maker
|
| French Press |
17-20
From the maker
|
60
Modelled
|
168-200
From the maker
|
| Cold Brew |
18-21
Modelled
|
Not recommended |
181-200
Modelled
|
| Drip / Batch |
15-17
Modelled
|
37-52
Modelled
|
96-120
From the maker
|
| Turkish | Not recommended |
1-3
Modelled
|
32-48
From the maker
|
| Siphon |
13-16
Modelled
|
30-45
Modelled
|
128-176
From the maker
|
| Cold Drip |
16-17
Modelled
|
45-60
Modelled
|
160-174
Modelled
|
| Percolator |
17-20
Modelled
|
60
Modelled
|
168-200
Modelled
|
| Cuccumella |
13-16
Modelled
|
30-45
Modelled
|
128-176
Modelled
|
| Kaapi Filter |
13-16
Modelled
|
26-41
Modelled
|
128-176
Modelled
|
| Jebena |
13-16
Modelled
|
30-45
Modelled
|
128-176
Modelled
|
| Chorreador |
13-16
Modelled
|
26-41
Modelled
|
128-176
Modelled
|
| Dallah |
6-11
Modelled
|
7-22
Modelled
|
50-84
Modelled
|
| Cafe de Olla |
17-18
Modelled
|
52-60
Modelled
|
167-181
Modelled
|
| Prestina |
13-16
Modelled
|
30-45
Modelled
|
128-176
Modelled
|
| Vietnamese Phin |
17-18
Modelled
|
52-60
Modelled
|
167-181
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.