Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Electric | Hand grinder |
| Burr | Conical | Flat | Conical |
| Burr size | 48 mm | 64 mm | 42 mm |
| Dial | 200 clicks | 11 clicks | 60 clicks |
| Adjustment | Stepped | Stepped | Stepped |
| Per click | 12.5 µm | 55 µm | 15 µm |
| Grind range | 0–1400 µm | 250–855 µm | 80–980 µm |
| Maker manual | Not on file | On file | Not on file |
| Maker-sourced settings | 8 | 5 | 0 |
| Brew methods | |||
| Espresso |
48-64
From the maker
|
Not recommended |
8-15
Modelled
|
| Moka Pot |
96-120
From the maker
|
Not recommended |
15-21
Modelled
|
| Pour Over (V60) |
128-176
From the maker
|
4-8
From the maker
|
25-38
Modelled
|
| Chemex |
160-174
Modelled
|
8-9
Modelled
|
41-55
Modelled
|
| AeroPress |
96-120
From the maker
|
3-6
From the maker
|
21-41
Modelled
|
| French Press |
168-200
From the maker
|
8-10
From the maker
|
55-60
Modelled
|
| Cold Brew |
181-200
Modelled
|
9-11
From the maker
|
Not recommended |
| Drip / Batch |
96-120
From the maker
|
7-9
From the maker
|
35-48
Modelled
|
| Turkish |
32-48
From the maker
|
Not recommended |
1-5
Modelled
|
| Siphon |
128-176
From the maker
|
4-8
Modelled
|
28-41
Modelled
|
| Cold Drip |
160-174
Modelled
|
8-9
Modelled
|
41-55
Modelled
|
| Percolator |
168-200
Modelled
|
Not recommended |
55-60
Modelled
|
| Cuccumella |
128-176
Modelled
|
4-8
Modelled
|
28-41
Modelled
|
| Kaapi Filter |
128-176
Modelled
|
4-8
Modelled
|
25-38
Modelled
|
| Jebena |
128-176
Modelled
|
4-8
Modelled
|
28-41
Modelled
|
| Chorreador |
128-176
Modelled
|
4-8
Modelled
|
25-38
Modelled
|
| Dallah |
50-84
Modelled
|
1-3
Modelled
|
8-21
Modelled
|
| Cafe de Olla |
167-181
Modelled
|
8-9
Modelled
|
48-60
Modelled
|
| Prestina |
128-176
Modelled
|
4-8
Modelled
|
28-41
Modelled
|
| Vietnamese Phin |
167-181
Modelled
|
8-9
Modelled
|
48-60
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.