Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Hand grinder | Hand grinder |
| Burr | Conical | Conical | Conical |
| Burr size | 40 mm | 38 mm | 48 mm |
| Dial | 24 clicks | 36 clicks | 200 clicks |
| Adjustment | Stepped | Stepped | Stepped |
| Per click | 43.75 µm | 30 µm | 12.5 µm |
| Grind range | 350–1400 µm | 0–1080 µm | 0–1400 µm |
| Maker manual | Not on file | On file | Not on file |
| Maker-sourced settings | 0 | 3 | 8 |
| Brew methods | |||
| Espresso | Not recommended |
7-8
From the maker
|
48-64
From the maker
|
| Moka Pot |
1
Modelled
|
9-11
Modelled
|
96-120
From the maker
|
| Pour Over (V60) |
2-7
Modelled
|
13-16
From the maker
|
128-176
From the maker
|
| Chemex |
8-13
Modelled
|
16-17
Modelled
|
160-174
Modelled
|
| AeroPress |
1-8
Modelled
|
11-16
Modelled
|
96-120
From the maker
|
| French Press |
13-19
Modelled
|
17-20
From the maker
|
168-200
From the maker
|
| Cold Brew |
15-24
Modelled
|
18-21
Modelled
|
181-200
Modelled
|
| Drip / Batch |
6-10
Modelled
|
15-17
Modelled
|
96-120
From the maker
|
| Turkish | Not recommended | Not recommended |
32-48
From the maker
|
| Siphon |
3-8
Modelled
|
13-16
Modelled
|
128-176
From the maker
|
| Cold Drip |
8-13
Modelled
|
16-17
Modelled
|
160-174
Modelled
|
| Percolator |
13-19
Modelled
|
17-20
Modelled
|
168-200
Modelled
|
| Cuccumella |
3-8
Modelled
|
13-16
Modelled
|
128-176
Modelled
|
| Kaapi Filter |
2-7
Modelled
|
13-16
Modelled
|
128-176
Modelled
|
| Jebena |
3-8
Modelled
|
13-16
Modelled
|
128-176
Modelled
|
| Chorreador |
2-7
Modelled
|
13-16
Modelled
|
128-176
Modelled
|
| Dallah |
1
Modelled
|
6-11
Modelled
|
50-84
Modelled
|
| Cafe de Olla |
10-15
Modelled
|
17-18
Modelled
|
167-181
Modelled
|
| Prestina |
3-8
Modelled
|
13-16
Modelled
|
128-176
Modelled
|
| Vietnamese Phin |
10-15
Modelled
|
17-18
Modelled
|
167-181
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.