Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Electric | Electric | Hand grinder |
| Burr | Flat | Conical | Conical |
| Burr size | 54 mm | 58 mm | 48 mm |
| Dial | 60 clicks | 100 clicks | 200 clicks |
| Adjustment | Stepless | Stepless | Stepped |
| Per click | 13.17 µm | 7.9 µm | 12.5 µm |
| Grind range | 110–900 µm | 310–1100 µm | 0–1400 µm |
| Maker manual | Not on file | Not on file | Not on file |
| Maker-sourced settings | 0 | 0 | 8 |
| Brew methods | |||
| Espresso |
7-14
Modelled
|
Not recommended |
48-64
From the maker
|
| Moka Pot |
14-22
Modelled
|
1-11
Modelled
|
96-120
From the maker
|
| Pour Over (V60) |
26-41
Modelled
|
18-43
Modelled
|
128-176
From the maker
|
| Chemex |
45-60
Modelled
|
49-75
Modelled
|
160-174
Modelled
|
| AeroPress |
22-45
Modelled
|
11-49
Modelled
|
96-120
From the maker
|
| French Press |
60
Modelled
|
75-100
Modelled
|
168-200
From the maker
|
| Cold Brew | Not recommended |
87-100
Modelled
|
181-200
Modelled
|
| Drip / Batch |
37-52
Modelled
|
37-62
Modelled
|
96-120
From the maker
|
| Turkish |
1-3
Modelled
|
Not recommended |
32-48
From the maker
|
| Siphon |
30-45
Modelled
|
24-49
Modelled
|
128-176
From the maker
|
| Cold Drip |
45-60
Modelled
|
49-75
Modelled
|
160-174
Modelled
|
| Percolator |
60
Modelled
|
75-100
Modelled
|
168-200
Modelled
|
| Cuccumella |
30-45
Modelled
|
24-49
Modelled
|
128-176
Modelled
|
| Kaapi Filter |
26-41
Modelled
|
18-43
Modelled
|
128-176
Modelled
|
| Jebena |
30-45
Modelled
|
24-49
Modelled
|
128-176
Modelled
|
| Chorreador |
26-41
Modelled
|
18-43
Modelled
|
128-176
Modelled
|
| Dallah |
7-22
Modelled
|
1-11
Modelled
|
50-84
Modelled
|
| Cafe de Olla |
52-60
Modelled
|
62-87
Modelled
|
167-181
Modelled
|
| Prestina |
30-45
Modelled
|
24-49
Modelled
|
128-176
Modelled
|
| Vietnamese Phin |
52-60
Modelled
|
62-87
Modelled
|
167-181
Modelled
|
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.