Compare grinders
Put two or three grinders side by side — burrs, dial, reach, and what each is actually set to for every brew method.
That's 3 — remove one to swap it out.
| Spec | |||
|---|---|---|---|
| Specifications | |||
| Type | Hand grinder | Electric | Electric |
| Burr | Conical | Conical | Conical |
| Burr size | 48 mm | 40 mm | 40 mm |
| Dial | 100 clicks | 31 clicks | 60 clicks |
| Adjustment | Stepped | Stepped | Stepped |
| Per click | 20 µm | 23.23 µm | — |
| Grind range | 0–1400 µm | 230–950 µm | — |
| Maker manual | Not on file | On file | On file |
| Maker-sourced settings | 8 | 5 | 3 |
| Brew methods | |||
| Espresso |
30-45
From the maker
|
3-9
From the maker
|
1-30
From the maker
|
| Moka Pot |
50-70
From the maker
|
7-10
Modelled
|
19-27
Modelled
|
| Pour Over (V60) |
80-87
From the maker
|
13-18
From the maker
|
31-46
Modelled
|
| Chemex |
87-91
Modelled
|
20-31
From the maker
|
50-54
Modelled
|
| AeroPress |
50-70
From the maker
|
10-15
From the maker
|
27-50
Modelled
|
| French Press |
90-100
From the maker
|
31
Modelled
|
55-60
From the maker
|
| Cold Brew |
94-100
Modelled
|
Not recommended | Not recommended |
| Drip / Batch |
50-70
From the maker
|
15-25
From the maker
|
46-54
From the maker
|
| Turkish |
20-36
From the maker
|
Not recommended | Not recommended |
| Siphon |
80-87
From the maker
|
13-20
Modelled
|
35-50
Modelled
|
| Cold Drip |
87-91
Modelled
|
20-31
Modelled
|
50-54
Modelled
|
| Percolator |
90-100
Modelled
|
31
Modelled
|
Not recommended |
| Cuccumella |
80-87
Modelled
|
13-20
Modelled
|
35-50
Modelled
|
| Kaapi Filter |
80-87
Modelled
|
13-18
Modelled
|
31-46
Modelled
|
| Jebena |
80-87
Modelled
|
13-20
Modelled
|
35-50
Modelled
|
| Chorreador |
80-87
Modelled
|
13-18
Modelled
|
31-46
Modelled
|
| Dallah |
34-49
Modelled
|
5-10
Modelled
|
12-27
Modelled
|
| Cafe de Olla |
89-94
Modelled
|
26-31
Modelled
|
Not recommended |
| Prestina |
80-87
Modelled
|
13-20
Modelled
|
35-50
Modelled
|
| Vietnamese Phin |
89-94
Modelled
|
26-31
Modelled
|
Not recommended |
“From the maker” means the setting comes from that grinder's own manual or grind chart. “Modelled” means we derived it — see the grind pipeline for how.